Easy fitting: It fits and comes off in just 3 minutes Ideal for vehicles with reduced clearance between mudguard and wheel An exclusive, patented fabric structure that gives outstanding grip on snow and ice Ideal for use in emergency conditions over short distances and for speeds up to 40km/h WARNING: USE ON ICE OR SNOW ONLY. Not to be used on dry roads (with no ice or snow), as that can cause the product to wear out early as well as make the vehicle behave worse. Recommendations for use: Consult your car manufacturer's manual to confirm that snow chains/snow socks can be fitted. To be used on tyres that are in good condition, are recommended by the manufacturer and whose dimensions are on the product's label. Respect the suitability of the product based on the tyre dimensions (only for vehicles under 2 tonnes). Snow socks are not a replacement for snow tyres. When snow socks are fitted on the driven wheels, the differences in grip between the front and rear wheels may make the vehicle more slippery. That is why you should be particularly careful when driving a vehicle with snow socks. To be fitted exclusively in pairs, at least on the driven wheels. If your vehicle is a 4x4 it is advisable to get two pairs of snow chains. Avoid sudden acceleration or braking. Once fitted on the wheels, snow socks centre themselves perfectly after about a hundred metres. Confirm that they are in the right position after about 1 kilometre. If your vehicle has a wheel anti-slip system (ASR, ESP and so on), do not switch it off. Do not exceed the maximum speed of 40km/h. Before parking for a long time, take the snow socks off, so they do not freeze onto the wheels and become harder to remove. Care instructions: The parts of the product that come into contact with the road are subject to wear. If the snow sock is cut, take it off so it does not cause a problem for the vehicle. If after the first use you notice the product is lightly punctured at particular points, the product can be used again. Not to be used on snow if there is excessive wear. If the product is punctured across 40% of the tyre's width, you should not use it. XL Perform Tools snow socks cannot be repaired and should be washed and put away dry in their packaging after every use. Fitting and removal: Follow the fitting instructions you see inside the packaging carefully. The owner of the product should follow the recommendations for use above; otherwise any damage that occurs, to the product, to the vehicle or even to a person, is their responsibility. It is advisable to do a trial fitting before the first use. In line with the French regulation "Arrete ministeriel des Transports du 18 juillet 1985: "DISPOSITIFS ANTIDERAPANTS EQUIPANT LES PNEUMATIQUES". It can be used where the B26 snow sign is present. EN16662-1:2020 Supplementary Grip Device, Cert no 288-22906, class: 7mm No warranty at all is given on the product for tearing or wear in use.