MALOSSI CENTRIFUGAL ROLLERS - WEIGHTS (VARIATOR) D25 X 17 (13 GRAMS) The malossi rollers or weights are the balls in the front centrifugal pulley and they determine the acceleration and top-speed performance through the belt drive to the scooter's rear wheel. They fit with no modification at all, replacing the manufacturer's or malossi's factory variator rollers. A SET OF 6 PIECES WITH THE DIMENSIONS BELOW Outside Diameter : 19mm Height : 13,7mm Weight : 10 gr TECHNICAL ADVICE Depending on how much each of these rollers weighs, they affect performance. By changing the weight from the manufacturer's grams we achieve, in the most economical way, a different performance and behaviour from the scooter. (WE NEVER CHANGE THE DIMENSIONS - HEIGHT & DIAMETER) SUGGESTION 1 Heavier than specified. A PARTIAL INCREASE IN TOP SPEED (Suggested for scooters with increased capacity, for riding at lower revs) SUGGESTION 2 The same weight as specified. NORMAL BEHAVIOUR - MAINTENANCE (Suggested for scooters with wear on the rollers already in use) SUGGESTION 3 Half the rollers the same weight as specified and half lighter, fitting them alternately inside the variator. SPORT RIDING (Suggested for knowledgeable riders) SUGGESTION 4 Lighter than the specified weight. RACING RIDING - MORE ACCELERATION (Suggested for demanding riders) SUGGESTION 5 REPLACE THE WHOLE VARIATOR WITH A MALOSSI Scooters are built at the factory to change 3 automatic gears. The variator is the main reason that happens. malossi variators are designed to improve a scooter's performance in a simple way, with no bodges, and to change 5 gears instead of 3. They add one gear at the start and one at the end, making the action smoother.